Product classification


undefined
+
  • undefined

Click image to enlarge

Fire hose interface tie machine

40-100

Retail price

$ 0

Market price

$ 0


Weight

0

Quantity
-
+

Stock

0

隐藏域元素占位

Key words:

Equipment, intelligent products

  • Product Description
    • Commodity name: Fire hose interface tie machine
    • Commodity ID: 40-100
    • 品牌: Hydraulic

    1、Equipment technical performance:Rated voltage: 220 V; Rated power 550W; Positive direction rotation; Cable tie size 40-100 adjustable, wire size 1.2-1.5mm; The tightening degree of the connector between the cable tie and the water tie can be

    Withstand 2.5MpaThe interface does not fall off under pressure.

    2. The function of the equipment: the fire hose interface cable tie machine is used for the cable tie operation of the fire hose and hose interface.
    3、The function of the equipment: the equipment adopts electric control, the cable tie speed is fast, the fastening is high and the force is uniform, and the cable tie specification can be based on the caliber of the water belt.40-100mmAdjustment, simple structure, convenient operation and other functions; effective solution

    To solve the problems of uneven force, slow and untight tie of manual tie in fire-fighting enterprises and fire-fighting forces.

    4. Equipment configuration: The equipment is composed of operating table, turbine reducer, motor, transmission device, three-jaw chuck, turntable and other components.

    5、of the equipmentProduct use:

    ① Place the equipment on the horizontal ground and connect 220V with the power cordPower supply, and ensure that the equipment is well grounded.

    ② Install the iron wire on the lead frame, and pull out one end of the iron wire and thread it through the guide wheel.

    ③ Place the sealing ring seat of the water with interface corresponding to the caliber of the water with interface such as a three-jaw chuck, and use a chuck wrench to lock the sealing ring seat of the water with interface until the sealing ring seat of the water with interface is not loose; Put a soft protective layer on the sealing ring seat of the water with interface;

    ④ Put the water belt into the sealing ring seat of the water belt interface, and roll the rest of the water belt and place it in the turntable;

    ⑤ Wrap the iron wire around the water belt, and fix the end of the iron wire at the locking screw of the three-jaw chuck and lock it;

    ⑥ Step on the foot switch to wind (the iron wire tightening part must be the groove part of the sealing ring seat of the water belt interface). When the iron wire winding groove part is fully wound, loosen the foot switch; Remove the iron wire end and the iron wire and tie the knot with a vice, adjust the iron wire guide wheel to wind the iron wire to the next groove part, continue to wind the iron wire until the groove part is fully wound, cut off the iron wire and tie the two iron wire ends with a vice, press the knots tightly with a vise;

    ⑦ Loosen the chuck with the chuck wrench, and take off the water tie; the operation steps of tying the other end are the same as above;

    ⑧ The tightness of the iron wire of the cable tie can be adjusted to the applicable tightness state according to the actual situation;

    6, the equipmentMaintenance:

    ① Always check whether the equipment and electrical devices are sensitive, and maintain them in time when they are not sensitive;

    ② Always check whether the drive shaft and gear are lubricated, and add lubricating oil in time;

    ③ When the equipment is not in use, the chuck wrench and vice should be put away to prevent loss; the iron wire should be sealed to prevent rust;

    ④ When the equipment is not in use, disconnect the power cord; prevent rain and corrosion.

    Key words:
    • 消防器材
    • 消防设备
    • 消防水带接口扎带机

1、Equipment technical performance:Rated voltage: 220 V; Rated power 550W; Positive direction rotation; Cable tie size 40-100 adjustable, wire size 1.2-1.5mm; The tightening degree of the connector between the cable tie and the water tie can be

Withstand 2.5MpaThe interface does not fall off under pressure.

2. The function of the equipment: the fire hose interface cable tie machine is used for the cable tie operation of the fire hose and hose interface.
3、The function of the equipment: the equipment adopts electric control, the cable tie speed is fast, the fastening is high and the force is uniform, and the cable tie specification can be based on the caliber of the water belt.40-100mmAdjustment, simple structure, convenient operation and other functions; effective solution

To solve the problems of uneven force, slow and untight tie of manual tie in fire-fighting enterprises and fire-fighting forces.

4. Equipment configuration: The equipment is composed of operating table, turbine reducer, motor, transmission device, three-jaw chuck, turntable and other components.

5、of the equipmentProduct use:

① Place the equipment on the horizontal ground and connect 220V with the power cordPower supply, and ensure that the equipment is well grounded.

② Install the iron wire on the lead frame, and pull out one end of the iron wire and thread it through the guide wheel.

③ Place the sealing ring seat of the water with interface corresponding to the caliber of the water with interface such as a three-jaw chuck, and use a chuck wrench to lock the sealing ring seat of the water with interface until the sealing ring seat of the water with interface is not loose; Put a soft protective layer on the sealing ring seat of the water with interface;

④ Put the water belt into the sealing ring seat of the water belt interface, and roll the rest of the water belt and place it in the turntable;

⑤ Wrap the iron wire around the water belt, and fix the end of the iron wire at the locking screw of the three-jaw chuck and lock it;

⑥ Step on the foot switch to wind (the iron wire tightening part must be the groove part of the sealing ring seat of the water belt interface). When the iron wire winding groove part is fully wound, loosen the foot switch; Remove the iron wire end and the iron wire and tie the knot with a vice, adjust the iron wire guide wheel to wind the iron wire to the next groove part, continue to wind the iron wire until the groove part is fully wound, cut off the iron wire and tie the two iron wire ends with a vice, press the knots tightly with a vise;

⑦ Loosen the chuck with the chuck wrench, and take off the water tie; the operation steps of tying the other end are the same as above;

⑧ The tightness of the iron wire of the cable tie can be adjusted to the applicable tightness state according to the actual situation;

6, the equipmentMaintenance:

① Always check whether the equipment and electrical devices are sensitive, and maintain them in time when they are not sensitive;

② Always check whether the drive shaft and gear are lubricated, and add lubricating oil in time;

③ When the equipment is not in use, the chuck wrench and vice should be put away to prevent loss; the iron wire should be sealed to prevent rust;

④ When the equipment is not in use, disconnect the power cord; prevent rain and corrosion.

15dfc1ba-84fa-4cd1-980b-0d9766af04e3.jpg

Online Message